The message "xxxxxxx.xxx can't be opened because it is from an unidentified developer." appears on OS X v10.8.x. (where xxxxxxx.xxx is the file name.)
The file name "xxxxxxx.xxx" mentioned in the message varies depending on the software. Examples could be BrotherTWAIN.pkg, BrotherCLDrivers.mpkg, BrotherINK11Drivers.mpkg, BrotherPrinterDrivers.mpkg, BrotherRSP.pkg.
Depending on security preferences on your Mac, you may get the message mentioned above when you try to install or start software. However all the software on the Downloads section on this site have been carefully-evaluated by Brother and are safe for your Mac.
If you get the message, follow the steps below to install or start the software.
Hold down the Control-key and then click the file ("xxxxxxx.pkg", "xxxxxxx.mpkg").
- Click Open to start the software and follow the instructions on the screen.
ADS-2100, DCP-135C, DCP-145C, DCP-165C, DCP-195C, DCP-350C, DCP-375CW, DCP-385C, DCP-560CN, DCP-585CW, DCP-6690CW, DCP-7010, DCP-7010L, DCP-7025, DCP-7030, DCP-7045N, DCP-7055, DCP-7065DN, DCP-8060, DCP-8065DN, DCP-8070D, DCP-9010CN, DCP-9040CN, DCP-J125, DCP-J140W, FAX-2840, FAX-2920, HL-2030, HL-2035, HL-2040, HL-2070N, HL-2130, HL-2140, HL-2150N, HL-2240D, HL-2270DW, HL-3040CN, HL-4040CN, HL-4050CDN, HL-4150CDN, HL-4570CDW, HL-5240, HL-5240L, HL-5250DN, HL-5270DN, HL-5340D, HL-5350DN, HL-5380DN, HL-5440D, HL-5450DN, HL-6050DN, HL-6180DW, HL-7050, HL-8050N, MFC-235C, MFC-250C, MFC-255CW, MFC-465CN, MFC-490CW, MFC-5860CN, MFC-6490CW, MFC-7225N, MFC-7320, MFC-7360, MFC-7420, MFC-7440N, MFC-7820N, MFC-7860DW, MFC-795CW, MFC-8220, MFC-8370DN, MFC-8380DN, MFC-8460N, MFC-8510DN, MFC-8860DN, MFC-8880DN, MFC-8910DW, MFC-8950DW, MFC-9120CN, MFC-9320CW, MFC-9440CN, MFC-9460CDN, MFC-9840CDW, MFC-990CW, MFC-9970CDW, MFC-J220, MFC-J6510DW
If you need further assistance, please contact Brother customer service:
Please note this form is used for feedback only.