HL-5240L
 |
FAQs & Troubleshooting |
HL-5240L
Date: 24/01/2019 ID: faq00100599_000
All print jobs are aborted and nothing is printed. (Linux)
-
The drivers for your machine may not installed properly, try to create a temporary symbolic link to link the file "/etc/init.d/cups" or "/etc/init.d/cupsys" to "/etc/init.d/lpd" and install the drivers again.
For rpm users:
ln -s /etc/init.d/cups /etc/init.d/lpd
ln -s /etc/init.d/cupsys /etc/init.d/lpd
For dpkg users:
ln -s /etc/init.d/cupsys /etc/init.d/lpd
-
If SELinux is working on your system, some configuration for SELinux is required.
Set your SELinux "permissive" or refer the FAQ for SELinux.
> Click here to print using CUPS while keeping SELinux enabled.
DCP-135C, DCP-145C, DCP-165C, DCP-350C, DCP-385C, DCP-560CN, DCP-585CW, DCP-6690CW, DCP-7010, DCP-7010L, DCP-7025, DCP-7030, DCP-7055, DCP-7065DN, DCP-8060, DCP-8065DN, DCP-8070D, DCP-9040CN, FAX-2840, FAX-2920, HL-2030, HL-2040, HL-2070N, HL-2130, HL-2140, HL-2150N, HL-2240D, HL-2270DW, HL-4040CN, HL-4050CDN, HL-5240, HL-5240L, HL-5250DN, HL-5270DN, HL-5340D, HL-5350DN, HL-5380DN, HL-5440D, HL-5450DN, HL-6050DN, HL-6180DW, HL-7050, HL-8050N, MFC-235C, MFC-250C, MFC-465CN, MFC-490CW, MFC-5860CN, MFC-6490CW, MFC-7360, MFC-7420, MFC-7440N, MFC-7820N, MFC-7860DW, MFC-8220, MFC-8370DN, MFC-8380DN, MFC-8460N, MFC-8510DN, MFC-8860DN, MFC-8880DN, MFC-8910DW, MFC-8950DW, MFC-9440CN, MFC-9840CDW, MFC-990CW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.