HL-2030
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl2030_all.jpg)
HL-2030
Date: 24/08/2006 ID: faq00000098_004
What is the printable area per page?
The edges of the paper that cannot be printed on are shown below.
Portrait
A4 | Letter | Legal | B5(ISO) | Executive | A5 | A6 | B6 | |
1 | 4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
2 | 6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
3 | 4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4 | 6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
![](/g/b/img/faqend/faq00000098_004/za/en/91183/printarea_0121.gif)
Landscape
A4 | Letter | Legal | B5(ISO) | Executive | A5 | A6 | B6(ISO) | |
1 | 4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
2 | 5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
3 | 4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4 | 5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
![](/g/b/img/faqend/faq00000098_004/za/en/91184/printarea_0218.gif)
HL-2030, HL-2035, HL-2040, HL-2070N, HL-2130, HL-2140, HL-2150N, HL-2240D, HL-2270DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.