DCP-385C
 |
FAQs & Troubleshooting |
DCP-385C
Date: 15/11/2011 ID: faq00000110_006
Can I adjust the Sleep Mode setting?
The Sleep Mode function of your Brother machine reduces power consumption while the machine is idle. You can adjust how long your Brother machine is idle before it goes into Sleep Mode. If you press a key on the control panel or the machine receives a fax, receives computer data, or makes a copy, the timer will be reset.
When the machine is in Sleep Mode the LCD will display will be blank.
If your Brother machine is in Sleep Mode when you adjust the Sleep Time, the new setting will take effect the next time the Brother machine receives data from your PC, receives a fax, or makes a copy.
To adjust your Brother machine's Sleep Mode setting, follow the steps listed below:
- Press Menu.
- Press the Up or Down Arrow key to select General Setup. Press OK.
- Press the Up or Down Arrow key to select Sleep Mode.
- Press the Left or Right Arrow key to select the amount of time your Brother machine is idle before entering Sleep Mode. You can choose 1 Min, 2 Mins, 3 Mins, 5 Mins, 10 Mins, 30 Mins, or 60 Mins which is the length of time the machine is idle before entering sleep mode. Press OK.
- Press Stop/Exit.
DCP-385C, MFC-490CW, MFC-5890CN, MFC-6490CW, MFC-J6510DW, MFC-J6710DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.