TJ-4422TN
Preguntas frecuentes y solución de problemas |
TJ-4422TN
Fecha: 09/28/2020 ID: faqp00100470_003
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
- Turn off the printer.
- Press and hold the right Selection button, and then turn on the Power Switch.
-
Release the button when Factory Default appears on the screen.
You can also release the button when the LED is flashing in green (5 times).
The LED color will change in the following order:Amber > red (5 times) > amber (5 times) > green (5 times) > green/amber (5 times) > red/amber (5 times) > green (lit)
Parameter Default setting Speed 152.4 mm/sec (6 ips) (203 DPI)
101.4 mm/sec (4 ips) (300 DPI)
76.2 mm/sec (3 ips) (600 DPI)Density 8 Label Width 101.5 mm (4") Label Height 101.5 mm (4") Sensor Type Gap sensor Gap Setting 3 mm (0.12") Print Direction 0 Reference Point 0,0 (upper left corner) Offset 0 Tear Mode On Peeler Mode Off Cutter Mode Off Rewinder Mode Off Code Page 850 Country Code 001 Clear Flash Memory No
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.