To add a custom media size for continuous tape, do the following:

1. Run the command to add a custom media size.
    
   1. Add a new Label Format with the "New Label Format" name and 30mm width and set the 30mm width and the 3mm label gap:
       "brpapertoollpr_td4100n -P TD-4100N -n Paper_Name -w 30 -h 30 -g 3.0 -m 2.0 -y 3 -x 1.5 -S [0/1]"  [enter]
      (Type the whole command as a single line before you press enter):
        
      -P Printer Name, e.g. TD-4100N
      -n New Label Name
      -w label width
      -h label length
      -g label spacing y
      -m label spacing x
      -y top,bottom margin
      -x right/left margin
      -S 0/1(0:Continuous Length Tape/1:Die-Cut Label)
        
      Example:
      brpapertoollpr_td4100n -P TD-4100N -n Paper_Name -w 56 -h 128 -g 3.0 -m 1.0 -y 3 -x 1.5 -S 1
      
       
   2. Remove the Label Format with the "New Label Format" name:
       "brpapertoollpr_td4100n -P TD-4100N -d Paper_Name"  [enter]

      Enter the Width and Height/Length in mm.

      Superuser authorization is required.

2. Select the new media size from "Set Printer Options" in "http://localhost:631/printers".
    

3. Try a test print from "Print Test Page".