SDX230DX
 |
Preguntas frecuentes y solución de problemas |
SDX230DX
Fecha: 10/05/2018 ID: faqh00000718_001
Care and Maintenance (Cleaning the Holder)
Cleaning the Holder
If material cuttings, lint or dust accumulate in the holder, it may not operate correctly.
Clean the holder after every use.
Clean the holder after every use.
-
Twist off the holder cap to remove it.
-
Using a commercially available brush, clean off cuttings, lint and dust.
Specifically clean off lint and dust around the blade. If lint and dust accumulate between the blade and holder, the blade may no longer rotate or the cutting quality may become poor. In addition, clean out any lint and dust that has accumulated in the cap.
-
Twist on the holder cap to attach it to the holder. Fully tighten the cap until it can no longer be turned.
SDX125, SDX125e, SDX125e Titanium, SDX125i, SDX125TS, SDX135PRO, SDX225, SDX225F, SDX230D, SDX230Di, SDX230DX, SDX325, SDX330D, SDX85, SDX85C, SDX85M, SDX85S
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.