Innov-is 40e
![]() |
Preguntas frecuentes y solución de problemas |
![](/g/b/img/product/hf_inov40eeus_2.jpg)
Innov-is 40e
Fecha: 04/22/2013 ID: faqh00000402_000
An "E7" message appears on the panel.
The needle mode selection key was pressed while a stitch that cannot be used with twin needle sewing was selected.
Select an appropriate stitch, or use single needle sewing.
Each time a key pressed or an incorrect operation is performed, a beep is sounded.
- For a correct operation
One beep is sounded. - If an incorrect operation is performed
Two or four beeps are sounded. - If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.