SE700
![]() |
Preguntas frecuentes y solución de problemas |
![](/g/b/img/product/hf_se700eus.jpg)
SE700
Fecha: 04/15/2020 ID: faqh00000058_001
How do I raise or lower the feed dogs?
The machine is equipped with the feed dog position switch to raise and lower the feed dogs.
When performing Button sewing or Free-motion quilting, use the feed dog position switch to lower the feed dogs.
The feed dog position switch is located at the rear of the machine on the base.
(1) Feed dog position switch
Using the feed dog position switch to lower the feed dogs
-
Slide the feed dog position switch lever, located at the rear of the machine on the base, to (
) (to the left as seen from the rear of the machine). The feed dogs are lowered.
-
After sewing is finished, slide the feed dog position switch lever to (
) (to the right as seen from the rear of the machine) and turn the handwheel to raise the feed dogs.
The feed dogs can not be raised only by sliding the drop feed lever to .
Raise the feed dogs as described below.
-
Slide the feed dog position switch lever to
.
- Turn the handwheel toward you (counterclockwise), or press the Needle position button once or twice to raise the feed dogs.
Innov-is NS1750D, Innov-is NS1850D, Innov-is NS80e, Innov-is NS80PRW, LB5000, LB5500, LB7000, SE600, SE625, SE630, SE700, SE725
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.