MFC-J480DW
Preguntas frecuentes y Solución de problemas |
MFC-J480DW
Fecha: 06/06/2023 ID: faq00100729_001
I cannot print or scan via USB on Fedora 38 or later and on their derivatives (Linux)
To be able to print or scan, do one of the following:
If you have one Brother machine
- Make sure that the machine is turned on.
- If you have already installed the Brother printer driver or scanner driver, uninstall them.
- Connect the machine to your computer using a USB cable.
- > Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
-
Disconnect the USB cable from your machine, wait a few seconds, and then reconnect the USB cable.
-
Install the Brother printer driver or scanner driver again.
If you have multiple Brother machines
- Make sure that the machines are turned on.
- If you have already installed the Brother printer drivers and scanner drivers, uninstall them.
- Connect the machines to your computer using USB cables.
- > Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
- Disconnect the USB cables from the machines, wait a few seconds, and then reconnect the USB cables.
- Install the Brother printer drivers and scanner drivers again.
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.