MFC-J497DW
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/mfcj497dw_us_eu_2.jpg)
MFC-J497DW
Fecha: 01/23/2020 ID: faq00100292_506
Scan to an Editable Text File Using OCR
![](/g/b/img/faqend/faq00100292_506/us_ot/en/2316034/GUID-B3AF9E55-FA45-45A0-802D-8CAA14714AE7-low.gif)
- The Scan to OCR feature is available for certain languages.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use either ControlCenter4 (Windows®) or Brother iPrint&Scan (Mac) software.
MFC-J491DW/MFC-J497DW
- Load your document.
- Press
(SCAN).
- Press
or
to select the [to PC] option, and then press OK.
- Press
or
to select the [to OCR] option, and then press OK.
- If the machine is connected over the network, press
or
to select the computer where you want to send data, and then press OK.
If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer, and then press OK.
- Do one of the following:
- To change the settings, go to the next step.
- To use the default settings, press Black Start or Color Start.[Scan Type] depends on the default settings. Pressing Black Start or Color Start does not allow you to change the settings.
- Press
or
to select the [Scan Settings] setting, and then press OK.
To use the [Scan Settings] option, a computer with either ControlCenter4 (Windows®) or Brother iPrint&Scan (Mac) software installed must be connected to the machine.
- Press
or
to select the [Set at Device] setting, and then press OK.
- Select the scan settings you want to change, and then press OK.OptionDescriptionScan Type
Select the scan type for your document.
ResolutionSelect the scan resolution for your document.
File TypeSelect the file format for your document.
Document SizeSelect your document size.
BrightnessSelect the brightness level.
ContrastSelect the contrast level.
Remove BackgroundChange the amount of background color that is removed.
- Press Black Start or Color Start.[Scan Type] depends on the settings you have selected. Pressing Black Start or Color Start does not allow you to change the settings.
MFC-J690DW/MFC-J895DW
- Load your document.
- Press .
- If the machine is connected over the network, press
or
to display the computer where you want to send data, and then press the computer name.
If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK].
- Do one of the following:
- To change the settings, press [Options] or [Set at Device].
- Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
To use the [Options] or [Set at Device] setting, a computer with either ControlCenter4 (Windows®) or Brother iPrint&Scan (Mac) software installed must be connected to the machine.
- Select the scan settings you want to change, and then press [OK].OptionDescriptionScan Type
Select the scan type for your document.
ResolutionSelect the scan resolution for your document.
File TypeSelect the file format for your document.
Document SizeSelect your document size.
BrightnessSelect the brightness level.
ContrastSelect the contrast level.
Remove Background ColorChange the amount of background color that is removed.
- To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to make this a One Touch Shortcut. Follow the LCD instructions.
- Press [Start].The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
Preguntas frecuentes relacionadas
MFC-J491DW, MFC-J497DW, MFC-J690DW, MFC-J895DW
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Observe que este formulario solo se utiliza para comentarios.