MFC-L8600CDW
 |
Preguntas frecuentes y Solución de problemas |
MFC-L8600CDW
Fecha: 03/27/2013 ID: faq00002647_002
When I send a fax from the machine, an error "not register." or "not registered." is displayed.
The Fax to server may be On and this may cause the issue.
To resolve the issue make sure that Fax to server is Off. There are two ways to change the settings of Fax to server: by using the control panel and by using the Web Based Management.
Choose the appropriate way and follow the steps below.
Method 1: Using the control panel
- Press
(Settings).
- Press All Settings.
- Press the Up or Down arrow and then press Network.
- Press the Up or Down arrow and then press Fax to Server.
- Press Off.
- Press
(Home).
Method 2: Using the Web Based Management
- Start your web browser.
- Type "http://machine's IP address/" into your browser's address bar (where "machine's IP address" is your machine's IP address).
For example: http://192.168.1.2/
- Click Fax and Fax to Server.
- Choose Off.
- Click Submit.
MFC-9130CW, MFC-9330CDW, MFC-9340CDW, MFC-L8600CDW, MFC-L8850CDW, MFC-L9550CDW
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.