MFC-8840D
Preguntas frecuentes y Solución de problemas |
MFC-8840D
Fecha: 09/06/2006 ID: faq00000299_003
How do I program the date and time?
To set the date and time, follow the instructions listed below:
-
Press the Menu key on the Control Panel.
-
Press the up or down navigation key and select Initial Setup, then Date/Time.
-
The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 04 for 2004).
-
Press the Set key.
-
The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
-
Press the Set key.
-
The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
-
Press the Set key.
-
The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
-
Press the Set key.
-
Press the Stop/Exit key on the Control Panel.
The LCD will display the date and time whenever the unit is idle.
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.