HL-1650
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/hl1650_all.jpg)
HL-1650
Fecha: 05/13/2013 ID: faq00000292_017
What kind of memory can I use?
HL-1650:
This printer has 8 Mbytes of standard memory and one slot for optional expansion memory. The memory can be expanded up to 136 Mbytes by installing commercially available dual in-line memory modules (DIMMs). (The standard memory installed varies depending on the country where it is purchased.)
HL-1670N:
This printer has 16 Mbytes of standard memory and one slot for optional expansion memory. The memory can be expanded up to 144 Mbytes by installing commercially available dual in-line memory modules (DIMMs). (The standard memory installed varies depending on the country where it is purchased.)
This printer uses memory modules that are: 100 pins, no-parity, SDRAM with 64Mbit or more. This printer is not compatible with Extended Data Output (EDO) DIMM, or DIMM that uses 16 Mbit SDRAM.
To see how to install additional memory, click here.
<Minimum memory recommendations>
For HL-1650 (Including 8 Mbytes of internal memory)
HP LaserJet, EPSON FX-850, and IBM Proprinter XL emulation modes
300 dpi |
600 dpi |
HQ1200 | |
Letter / A4 |
Standard |
Standard |
24 Mbytes |
Legal |
Standard |
Standard |
24 Mbytes |
BR-Script 3 mode
300 dpi |
600 dpi |
HQ1200 | |
Letter / A4 |
Standard |
Standard |
24 Mbytes |
Legal |
Standard |
Standard |
24 Mbytes |
2-Sided(Duplex) printing
300 dpi |
600 dpi |
HQ1200 | |
HP LaserJet |
Standard |
24 Mbytes |
40 Mbytes |
BR-Script 3 |
Standard |
24 Mbytes |
40 Mbytes |
For HL-1670N (Including 16 Mbytes of internal memory)
HP LaserJet, EPSON FX-850, and IBM Proprinter XL emulation modes
300 dpi |
600 dpi |
HQ1200 | |
Letter / A4 |
Standard |
Standard |
Standard |
Legal |
Standard |
Standard |
Standard |
BR-Script 3 mode
300 dpi |
600 dpi |
HQ1200 | |
Letter / A4 |
Standard |
Standard |
Standard |
Legal |
Standard |
Standard |
Standard |
2-Sided(Duplex) printing
300 dpi |
600 dpi |
HQ1200 | |
HP LaserJet |
Standard |
Standard |
32 Mbytes |
BR-Script 3 |
Standard |
Standard |
32 Mbytes |
The following DIMM size can be installed:
16 Mbyte |
TECHWORKS | PM-HP 16M-BR |
32 Mbyte |
TECHWORKS | PM-HP 32M-BR |
64 Mbyte |
TECHWORKS | PM-HP 64M-BR |
128 Mbyte |
TECHWORKS | PM-HP 128M-BR |
In general, DIMM must have the following specifications:
Type | 100 pin and 32 bit output |
CAS Lantency | 2 or 3 |
Clock Frequency | 66MHz or more |
Capacity | 16, 32, 64 Mbyte or 128 Mbyte |
Height | 46mm (1.8 inches) or less |
Parity | NONE |
Dram Type | SDRAM 4 Bank |
SDRAM can be used. |
For more information, consult the dealer where you purchased the printer.
Preguntas frecuentes relacionadas
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Observe que este formulario solo se utiliza para comentarios.