MFC-J497DW
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/mfcj497dw_us_eu_2.jpg)
MFC-J497DW
Fecha: 01/23/2020 ID: faq00000105_510
Reset the Network Settings to Factory Default
You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
- IMPORTANT
- (MFC-J491DW/MFC-J497DW/MFC-J690DW)
When you reset the machine, your faxes that are stored in the machine's memory may be deleted. Before you reset the machine, you can transfer your faxes to your computer or another fax machine so you will not lose any important messages.
![](/g/b/img/faqend/faq00000105_510/us_ot/en/2308219/topic1_icon5.png)
- This feature restores all wired (supported models only) and wireless network settings to the factory settings.
- You can also reset the print server to its factory default settings using BRAdmin Light or BRAdmin Professional.
MFC-J491DW/MFC-J497DW
- Press Settings.
- Press
or
to select the following:
- Select [Network]. Press OK.
- Select [Network Reset]. Press OK.
- Press
for two seconds to confirm.
The machine restarts.
MFC-J690DW/MFC-J895DW
- Press
.
- The message confirming reset will be displayed. Press [OK] for two seconds.The machine will restart.
MFC-J491DW, MFC-J497DW, MFC-J690DW, MFC-J895DW
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.