HL-EX470W
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/hlex470w_us.jpg)
HL-EX470W
Fecha: 03/23/2022 ID: faq00000006_040
Vertical colored streaks or bands appear on the page
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
Check the following points to resolve the issue:
-
Clean all four corona wires (one for each color) inside the drum unit by sliding the green tab.
> Click here to see how to clean the corona wires.
-
Make sure the green tab of the corona wire is in the home position (1).
-
Replace the toner cartridge that matches the color of the streak or band.
To identify the color of the toner cartridge, follow the steps below:- > Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color causing the issue.
-
Replace the toner cartridge of the color.
> Click here to see how to replace the toner cartridge.
-
Install a new drum unit.
> Click here to see how to replace the drum unit.
HL-EX470W, HL-L8260CDW, HL-L8360CDW(T), HL-L9410CDN, HL-L9430CDN, HL-L9470CDN
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.