HL-5030
Preguntas frecuentes y Solución de problemas |
HL-5030
Fecha: 04/26/2013 ID: faq00000006_012
Vertical black lines appear on the printout.
Please check the following points:
-
Clean the primary corona wire of the drum unit. To see how to clean the corona wire of the drum unit, click here.
-
Make sure the primary corona wire cleaner is at the home position.
- The toner cartridge may be damaged. Put in a new toner cartridge. To see how to replace the toner cartridge, click here.
- The drum unit may be damaged. Put in a new drum unit. To see how to replace the drum unit, click here.
- If you still cannot resolve the issue after taking countermeasures listed above, please call Brother Customer Service. Click here to go to "Contact us" page.
Preguntas frecuentes relacionadas
HL-5030, HL-5040, HL-5050, HL-5070N
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.