MFC-J3720
 |
常見問題&故障排除 |
MFC-J3720
日期:06/06/2023 ID:faq00100729_001
I cannot print or scan via USB on Fedora 38 or later and on their derivatives (Linux)
To be able to print or scan, do one of the following:
If you have one Brother machine
- Make sure that the machine is turned on.
- If you have already installed the Brother printer driver or scanner driver, uninstall them.
- Connect the machine to your computer using a USB cable.
- > Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
-
Disconnect the USB cable from your machine, wait a few seconds, and then reconnect the USB cable.
-
Install the Brother printer driver or scanner driver again.
If you have multiple Brother machines
- Make sure that the machines are turned on.
- If you have already installed the Brother printer drivers and scanner drivers, uninstall them.
- Connect the machines to your computer using USB cables.
- > Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
- Disconnect the USB cables from the machines, wait a few seconds, and then reconnect the USB cables.
- Install the Brother printer drivers and scanner drivers again.
如果您需要進一步的協助, 請聯絡Brother客戶服務:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質