常見問題&故障排除

關閉頁面

MFC-T910DW

常見問題&故障排除

常見問題&故障排除

MFC-T910DW

不是您的產品嗎?

日期:26/04/2018 ID:faq00100420_503

Use PC-Fax Receive to Transfer Received Faxes to Your Computer (Windows® only)

Turn on the PC-Fax Receive feature, automatically store incoming faxes to your machine's memory, and then send them to your computer. Use your computer to view and store these faxes.
  • This feature is available only for monochrome faxes. When you receive a colour fax, your machine prints the colour fax but does not send the fax to your computer.
  • Before you can set up PC-Fax Receive, you must install the Brother software and drivers on your computer. Make sure your computer is connected and turned on. You must have the PC-FAX Receiving software running on your computer.

Even if your computer is turned off, your machine will receive and store faxes in its memory. When you start your computer and the PC-FAX Receiving software runs, your machine transfers faxes to your computer automatically.

MFC-T810W

  1. Press Menu.
  2. Press or to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [PC Fax Receive]. Press OK.
    4. Select [On]. Press OK.
      The LCD displays the message [Please Start the PC-FAX Receive program on your computer.].
    5. Press OK.
    6. Select [<USB>] or the name of the destination computer you want to receive faxes if you are on a network. Press OK.
    7. Select [BackupPrint:On] or [BackupPrint:Off]. Press OK.
  3. Press Stop/Exit.

To change the destination computer, repeat these steps.

MFC-T910DW

  1. Press Settings.
  2. Press or to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [PC Fax Receive]. Press OK.
    4. Select [On]. Press OK.
      The LCD displays the message [Run the PC-Fax Receive program on your computer.].
    5. Press .
    6. Select [<USB>] or the name of the destination computer you want to receive faxes if you are on a network. Press OK.
    7. Select [Backup Print: On] or [Backup Print: Off]. Press OK.
  3. Press Stop/Exit.

To change the destination computer, repeat these steps.

相關常見問題

相關的產品

MFC-T810W, MFC-T910DW

如果您需要進一步的協助, 請聯絡Brother客戶服務:

內容意見回饋

請於下方回饋您的意見以幫助我們提升服務的品質
步驟一: 此頁面的資訊對您有幫助嗎
步驟二: 你有任何其他想要提出的意見嗎?

請注意, 此表格僅用做意見回饋使用

送出