DCP-T310
![]() |
常見問題&故障排除 |
![](/g/b/img/product/dcpt310_all.jpg)
DCP-T310
日期:26/04/2018 ID:faq00100359_503
Check the Print Quality
If faded or streaked colours and text appear or if text is missing on your printouts, the print head nozzles may be clogged. Print the Print Quality Check Sheet and look at the nozzle check pattern.
DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W
- Press Menu.
- Press
or
to select the following:
- Select [Maintenance]. Press OK.
- Select [ImproveQuality]. Press OK.
- Select [Check Quality]. Press OK.
- Press Colour Start.The machine prints the Print Quality Check Sheet.
- Check the quality of the four colour blocks on the sheet.
- The LCD asks about the print quality. Do one of the following:
- If all lines are clear and visible, press
to select [Yes].
Press Stop/Exit to finish the Print Quality check.
- If lines are missing (see Poor, below), press
to select [No].
OK (DCP-T310/DCP-T510W)
Poor (DCP-T310/DCP-T510W)
OK (DCP-T710W/MFC-T810W)
Poor (DCP-T710W/MFC-T810W)
- The LCD asks you to check the print quality of each colour. Press
or
to select one of the patterns that most closely matches the printing result, and then press OK.
Refer to the sample below to check the print quality.
DCP-T310/DCP-T510W
Patterns
Print Quality
None
A Few
About Half
Many
DCP-T710W/MFC-T810W
Patterns
Print Quality
None
A Few
About Half
Many
- Do one of the following:
- If print head cleaning is needed, press Colour Start to start the cleaning procedure.
- If print head cleaning is not needed, press Stop/Exit to finish the Print Quality check.
- After the cleaning procedure is finished, press
. Then, press Colour Start.
The machine prints the Print Quality Check Sheet again. Check the quality of the four colour blocks on the sheet again.
If you clean the print head at least five times and the print has not improved, try cleaning the print head again up to three more times. If the print has not improved, contact Brother customer service or your local Brother dealer.
- IMPORTANT
- DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.
![](/g/b/img/faqend/faq00100359_503/as_ot/en/1897055/topic1_icon5.png)
When a print head nozzle is clogged, the printed sample looks like this.
![](/g/b/img/faqend/faq00100359_503/as_ot/en/1897064/GUID-68E1960A-096D-41B3-978F-1461213CE6EB-low.gif)
After the print head nozzle is cleaned, the horizontal lines are gone.
![](/g/b/img/faqend/faq00100359_503/as_ot/en/1897065/GUID-1FC4A64D-6E6C-413D-9AC1-EC743D563369-low.gif)
MFC-T910DW
- Press Settings.
- Press
or
to select the following:
- Select [General Setup]. Press OK.
- Select [Maintenance]. Press OK.
- Select [Impr. PrintQuality]. Press OK.
- Select [Impr. PrintQuality] again. Press OK.
- Press
.
The machine prints the Print Quality Check Sheet. - Check the quality of the four colour blocks on the sheet.
- The LCD asks about the print quality. Do one of the following:
- If all lines are clear and visible, press
to select [No].
The Print Quality check finishes.
- If lines are missing (see Poor, below), press
to select [Yes].
OK
Poor
- The LCD asks you to check the print quality of each colour. Press
or
to select the pattern (1–4) that most closely matches the printing result, and then press OK.
- Do one of the following:
- If print head cleaning is needed, press
to start the cleaning procedure.
- If print head cleaning is not needed, the Ink or Maintenance screen reappears on the LCD.
- After the cleaning procedure is finished, the LCD asks if you want to check the print quality again.
Press
[Yes] to start the print quality check.
- Press
again.
The machine prints the Print Quality Check Sheet again. Check the quality of the four colour blocks on the sheet again.
If you clean the print head at least five times and the print has not improved, try cleaning the print head again up to three more times. If the print has not improved, contact Brother customer service or your local Brother dealer.
- IMPORTANT
- DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.
![](/g/b/img/faqend/faq00100359_503/as_ot/en/1897055/topic1_icon5.png)
When a print head nozzle is clogged, the printed sample looks like this.
![](/g/b/img/faqend/faq00100359_503/as_ot/en/1897064/GUID-68E1960A-096D-41B3-978F-1461213CE6EB-low.gif)
After the print head nozzle is cleaned, the horizontal lines are gone.
![](/g/b/img/faqend/faq00100359_503/as_ot/en/1897065/GUID-1FC4A64D-6E6C-413D-9AC1-EC743D563369-low.gif)
DCP-T310, DCP-T510W, DCP-T710W, MFC-T810W, MFC-T910DW
如果您需要進一步的協助, 請聯絡Brother客戶服務:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質