DCP-T300
![]() |
常見問題&故障排除 |
![](/g/b/img/product/dcpt300_all.jpg)
DCP-T300
日期:03/09/2018 ID:faq00003017_004
Make a two-sided copy of an ID card.
You can copy both sides of an ID card onto a single page, keeping the card's original size.
-
The machine's paper size must be set to Letter or A4.
-
You can only make one color copy at a time.
- You cannot use the Sort, Enlarge/Reduce and Remove Background settings with the 2in1 (ID) feature.
Follow the steps below to use your Brother machine's 2 in 1 ID Copying feature:
-
Place your ID card face down on the upper-left corner of the flat scanner glass.
*1: 0.12 in. (3mm) or greater (top, left)
*2: 8.5 in. (216 mm)
*3: 5.5 in. (140 mm)
*4: scannable area
-
(MFC models)
Press(COPY).
-
You can enter the number of copies in the following ways:
-
(MFC models)
Use the dial pad.
-
(DCP models)
Press + or - key on the control panel repeatedly.
-
(MFC models)
-
Press Copy Options.
-
Press the Up or Down arrow key to choose Page Layout. Press OK.
-
Press the Up or Down arrow key to choose 2in1 (ID). Press OK.
-
Do one of the following:
- Press Black (Mono) Start to make a black and white copy.
- Press Color (Colour) Start to make a color copy.
-
Do one of the following:
-
(MFC models)
After the machine has scanned one side, press 1 (Yes).
-
(DCP models)
After the machine has scanned one side, press + (Yes).
-
(MFC models)
-
Turn over the ID card.
- Press OK to scan the other side of the ID card.
如果您需要進一步的協助, 請聯絡Brother客戶服務:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質