常見問題&故障排除

關閉頁面

MFC-290C

常見問題&故障排除

常見問題&故障排除

日期:21/02/2013 ID:faq00002520_004

When I print or copy a document with fast mode, the printing is shifted too high on the paper.

Powder from the paper may build up on the surface of the paper pick-up roller. This may cause the paper to slip as it is picked from the tray. To resolve this issue follow the steps below:

  • Clean the paper pick-up roller

    1. Pull the paper trays completely out of the machine.
    2. Unplug the machine from the AC power outlet and open the Jam Clear Cover (1) at the back of the machine.


    3. Clean the Paper Pick-up Roller (1) with isopropyl alcohol on a cotton swab.


    4. Close the Jam Clear Cover. Make sure the Jam Clear Cover is closed properly.
    5. Put the paper trays firmly back in the machine.
    6. Re-connect the power cord.


  • Flip the paper in the paper tray


    If you are using paper that has a coating on one side (ex. Photo Paper) skip this step.


    1. Take the paper out of the tray and fan the stack of paper well.
    2. Install the paper into the paper tray with the other side of paper face up.
    3. Put the paper tray firmly back in the machine.
    4. Start copying or printing again.

 

If you still have a problem after performing the previous steps Brother recommends copying or printing your document at a higher resolution (increased resolutions will print your document at slower speeds).

  • Change the copy or print quality setting


    -  for Copy

    1. Make sure you are in Copy mode.
    2. Press the Copy Options button on the control panel.
    3. Select Quality using the Up or Down arrow key and press OK.
    4. Press Up or Down arrow key to select Normal or Best and press OK.
    5. Start copying.


    - for PC print

    For Windows users:

    1. Open Printing Preferences. (Click here to see how to open Printing Preferences.)

    2. Change the print mode at the Quality section. Select one of the modes Fast Normal, Normal, Fine, Photo or Highest.


    3. Click Apply -> OK


    For Mac OS X Users:

    1. Open Print dialog. (Click here to see how to open Print dialog.)
    2. Select Print Settings from the print box.
    3. Change the print mode at the Quality section. Select one of the modes Fast Normal, Normal, Fine, Photo or Highest.

如果您需要進一步的協助, 請聯絡Brother客戶服務:

內容意見回饋

請於下方回饋您的意見以幫助我們提升服務的品質
步驟一: 此頁面的資訊對您有幫助嗎
步驟二: 你有任何其他想要提出的意見嗎?

請注意, 此表格僅用做意見回饋使用