常見問題&故障排除

關閉頁面

DCP-T520W

常見問題&故障排除

常見問題&故障排除

DCP-T520W

不是您的產品嗎?

日期:28/10/2020 ID:faq00000299_518

Set the Date and Time

(MFC models)

The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.

(DCP models)

If the machine's power has been off, the machine's date and time may not be current. Re-enter them.

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press Menu.
  2. Press image or image to make your selections:
    1. Select [Initial Setup]. Press OK.
    2. Select [Date & Time]. Press OK.
    3. Select [Date & Time]. Press OK.
  3. Press image or image on the control panel to set the last two digits of the year. Press OK. Repeat these steps for setting the month and day.
  4. Press image or image to select [12h Clock] or [24h Clock], and then press OK.
  5. Enter the digits for the time in one of the following ways:
    • If you selected [12h Clock]:

      • Press image or image on the control panel to set the hour. Press OK. Repeat these steps for setting the minute.
      • Press image or image to select [AM] or [PM], and then press OK.

    • If you selected [24h Clock]:

      • Press image or image on the control panel to set the hour. Press OK. Repeat these steps for setting the minute.

  6. Press Stop/Exit.

MFC-T920DW/MFC-T925DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [Initial Setup]. Press OK.
    2. Select [Date & Time]. Press OK.
    3. Select [Date]. Press OK.
  3. Enter the last two digits of the year using the dial pad, and then press OK.
  4. Enter the two digits for the month using the dial pad, and then press OK.
  5. Enter the two digits for the day using the dial pad, and then press OK.
  6. Press image or image to select [Clock Type], and then press OK.
  7. Press image or image to select [12h Clock] or [24h Clock], and then press OK.
  8. Press image or image to select [Time], and then press OK.
  9. To enter the time, do one of the following:
    • If you selected [12h Clock]:
      1. Press image or image to select [AM] or [PM], and then press OK.
      2. Enter the four digits of the time (in 12-hour format) using the dial pad, and then press OK.
    • If you selected [24h Clock]:

      Enter the four digits of the time (in 24-hour format) using the dial pad, and then press OK.

  10. Press Stop/Exit.

相關的產品

DCP-T520W, DCP-T820DW, MFC-T920DW

如果您需要進一步的協助, 請聯絡Brother客戶服務:

內容意見回饋

請於下方回饋您的意見以幫助我們提升服務的品質
步驟一: 此頁面的資訊對您有幫助嗎
步驟二: 你有任何其他想要提出的意見嗎?

請注意, 此表格僅用做意見回饋使用

送出