DCP-T820DW
常見問題&故障排除 |
DCP-T820DW
日期:28/10/2020 ID:faq00000105_525
Reset the Network Settings to Factory Default
You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
This feature restores all wired (supported models only) and wireless network settings to the factory settings.
- You can also reset the print server to its factory settings using Web Based Management.
DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW
- Press Menu.
- Press or to select the following:
- Select [Initial Setup]. Press OK.
- Select [Reset]. Press OK.
- Select [Network Reset]. Press OK.
- Press for [Reset] to confirm.
- Press for [Yes] to reboot the machine.The machine restarts.
MFC-T920DW/MFC-T925DW
- Press Settings.
- Press or to make your selections:
- Select [Network]. Press OK.
- Select [Network Reset]. Press OK.
- Press for two seconds to confirm.The machine restarts.
DCP-T520W, DCP-T820DW, MFC-T920DW
如果您需要進一步的協助, 請聯絡Brother客戶服務:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質