PJ-722
![]() |
SSS ve Sorun Giderme |
![](/g/b/img/product/pj722eas.jpg)
PJ-722
Tarih: 07/02/2020 ID: faqp00001469_005
How to install the rechargeable Li-ion battery (optional)
Installing the rechargeable Li-ion battery
- Move the Battery Latch 1 to the unlock position.
-
While holding the Battery Latch 2 in the unlock position, remove the Battery Cavity Mounting Block.
1. Battery Latch 1
2. Battery Latch 2
3. Battery Cavity Mounting Block -
Release the Battery Latch 2.
The Battery latch 2 moves back to the lock position. -
Insert the battery into the battery cavity until it locks into place.
4. Battery cavity
5. Rechargeable Li-ion battery -
Move the Battery Latch 1 to the lock position.
- The voltage supplied by the rechargeable Li-ion battery may vary. The printing speed may also vary depending on the voltage.
- When the battery is being used, the battery cavity mounting block is not needed. Keep it in a safe place to avoid losing it.
Removing the rechargeable Li-ion battery
-
Move the Battery Latches to the unlock position, and then remove the battery.
1. Battery latches - Insert the Battery Cavity Mounting Block into the battery cavity until it locks into place.
- Move the Battery Latch 1 to the lock position.
İlgili SSS
Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:
İçerik Geri Bildirimi
Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.
Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?
Adım 2: Eklemek istediğiniz başka bir yorum var mı?
Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.