PR1000e
![]() |
SSS ve Sorun Giderme |
![](/g/b/img/product/hf_1000e_eas.jpg)
PR1000e
Tarih: 07/29/2016 ID: faqh00000598_001
Maintenance (Cleaning the thread paths of the upper threads)
If dust or lint has accumulated in the thread guides or tension unit in the paths of the upper threads, the thread may break while embroidery is being sewn. Periodically clean the thread paths.
Cleaning the thread guides
-
Use the included cleaning brush to remove any lint and dust from below the thread guide plates.
Clean the thread guide plates for both the upper thread guides and the middle thread guides.
Upper thread guide Middle thread guide Thread guide plate
Disassembling and cleaning the tension unit
-
To remove tension dial, turn dial counterclockwise as shown on illustration.
Tension dial -
Using the included cleaning brush, remove any lint and dust from the two pieces of felt washers (top, bottom) inside the tension dial.
Tension dial Nylon shoulder washer Tension spring Tension base spring Felt washer (top) Tension disc Felt washer (bottom) -
Reassembling the tension unit.
-
When reassembling the tension unit, be sure not to install the tension disc upside-down. There is a magnet on the bottom.
Bottom Top Magnet
- When reassembling the tension unit, be careful not to lose any parts or install any parts in an incorrect order. The machine may not operate correctly if the tension units are incorrectly reassembled.
-
When reassembling the tension unit, be sure not to install the tension disc upside-down. There is a magnet on the bottom.
İlgili SSS
Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:
İçerik Geri Bildirimi
Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.
Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?
Adım 2: Eklemek istediğiniz başka bir yorum var mı?
Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.