HL-5070N
SSS ve Sorun Giderme |
HL-5070N
Tarih: 10/17/2006 ID: faq00000748_001
The printer prints unexpectedly or it prints garbage.
Make sure that the printer cable is not too long. We recommend that you use a parallel or USB cable that is no longer than 2 meters (6.5 feet).
Make sure that the printer cable is not damaged or broken.
If you are using an interface-switching device, remove it. Connect your computer directly to your printer, and then try again.
Make sure that you have chosen the proper printer driver with 'Set as Default'.
- Make sure that the printer is not connected to the same port that is also connected to a storage device or scanner. Take away all other devices and connect the port only to the printer.
- Turn off the Status Monitor in the Device Options tab in the Windows® printer driver.(if applicable)
Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:
İçerik Geri Bildirimi
Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.
Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?
Adım 2: Eklemek istediğiniz başka bir yorum var mı?
Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.