HL-1270N
 |
SSS ve Sorun Giderme |
HL-1270N
Tarih: 03/20/2012 ID: faq00000355_001
Why does the Drum LED light?
The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. If you want to know their difference, refer to "What is the difference between the toner cartridge and the drum unit?"
- The Drum LED lights if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one.
-
The Drum LED continues to light if the drum counter was not reset when you replaced the drum. To reset the drum follow the instructions below:
- Open the front cover.
- Keep holding down the button until all LEDs turn on with the front cover open, then release the button.
-
Make sure that the Drum LED is off. Close the front cover.
Reset the drum counter only when you replaced the drum unit with a new one.
İlgili SSS
- What do the LED indications mean?
- Why are all the lights blinking then the drum light blinking?
- Why are the ready and alarm lights blinking?
- Why are the alarm and data lights blinking?
- The Drum LED is still lit even after replacing the old drum unit with a new one. What can I do?
- Why are the alarm and data lights on?
Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:
İçerik Geri Bildirimi
Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.
Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?
Adım 2: Eklemek istediğiniz başka bir yorum var mı?
Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.