HL-5070N
SSS ve Sorun Giderme |
HL-5070N
Tarih: 04/26/2013 ID: faq00000006_012
Vertical black lines appear on the printout.
Please check the following points:
-
Clean the primary corona wire of the drum unit. To see how to clean the corona wire of the drum unit, click here.
-
Make sure the primary corona wire cleaner is at the home position.
- The toner cartridge may be damaged. Put in a new toner cartridge. To see how to replace the toner cartridge, click here.
- The drum unit may be damaged. Put in a new drum unit. To see how to replace the drum unit, click here.
- If you still cannot resolve the issue after taking countermeasures listed above, please call Brother Customer Service. Click here to go to "Contact us" page.
İlgili SSS
Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:
İçerik Geri Bildirimi
Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.
Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?
Adım 2: Eklemek istediğiniz başka bir yorum var mı?
Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.