คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

ปิด

MFC-L8850CDW

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

วันที่:10/04/2023 หมายเลขรหัส:faq00000185_005

The network scanning feature does not work when pressing the scan key on my Brother machine control panel. (For Windows)

Follow the steps below to resolve the issue:

 

Step1: Ensure the ControlCenter is running

It will be displayed in the task tray near the system clock. If this program is not active, open it by the steps below.

 

(Windows 8)

  1. On the Start screen, click DownArrow.
    If DownArrow is not on the Start screen, right-click somewhere on an empty spot, and then click, All Apps from the bar.
     
  2. Click Brother Utilities.
     
  3. Click Scan in the left navigation bar, and then click ControlCenter.

(Windows 7, 10, 11)

  1. Click Start  or Start_10(Start) => (All Programs or All apps =>) Brother => Brother Utilities.
     
  2. Click Scan in the left navigation bar, and then click ControlCenter.

Try to scan again. If you are still not able to scan from the buttons on the machine, continue to the next step.

 

Step2: Verify that the scanner driver is installed and the port is configured correctly

NOTE: Illustrations shown below are from a representative product and operating system and may differ from your Brother machine and operating system.

 

(Windows 7 / Windows 8 / Windows 10)

  1. Open Scanner Properties. (Click here to see how to open Scanner Properties.)
     
  2. The Network Scanner Properties dialog box appears.
    Click the Network Setting tab and select Specify your machine by address or Specify your machine by name.

      Network Setting tab  

     

    • If you select Specify your machine by address, enter the IP Address of the machine in IP Address box, and then click OK.
       
    • If you select Specify your machine by name,

       

      1. Enter the machine node name in the Node Name box, or click Browse and select the Brother machine you want to use and click OK.

          Search for Devices

         

      2. Click OK.
    You can find your machine's IP Address or Node Name by printing the Network Configuration Report.
    > Click here to see how to print the Network Configuration Report.
  3. Click the Scan to Button tab, and then type your computer's name in the Display Name (Max 15 characters) field. The machine's LCD displays the name you type. The default setting is your computer's name. You can type any name you like.

    Scan To Button tab
     
  4. Click OK.
    If the issue continues, go to Step 3.

(Windows 11)

  1. Open scanner properties.
     
  2. Click the Scan To Button tab and check the Register your computer with the "Scan To" functions at the machine check box. Then enter the name you like in the Display Name box. This name will appear when "Scan to" menu is selected at the machine. Your computer name is in the Display Name box as default, but you can overwrite it.

    Scan To Button tab
     
  3. Click OK.

Step3: Check for a firewall setting on your computer

If a Firewall on your computer is active, it may be rejecting the necessary network connection needed for the network scanning software to operate properly. Disable the Firewall on your computer and try the network scanning again.

Temporarily change your firewall/security settings to allow network connection

Your computer's firewall/security software may be preventing the network connection from being established. If you receive firewall-related notifications, we recommend temporarily changing the security settings on your computer to establish the connection.


Customize Settings
 

IMPORTANT

  • Before disabling the firewall, make sure the changes you want to make are suitable for your network. Brother will not take any responsibility for any consequences of disabling the firewall.
  • When finished, make sure to turn the firewall on again.

If the feature works properly after disabling the Firewall, this means the Firewall on your computer is rejecting the necessary network connection. In this case, Brother recommends you either disable the Firewall on your computer whenever you need to network scan using the scan key or leave the Firewall enabled and adjust the Firewall settings.

If the firewall blocks network communication, we recommend adding the following Internal/External ports in your firewall:

  • UDP: 54925
  • UDP: 137
  • UDP: 161

If the issue still continues after changing the Firewall settings, refer to "FAQs & Troubleshooting" for other information.

คำถามที่พบบ่อยที่เกี่ยวข้อง

รุ่นที่เกี่ยวข้อง

DCP-1610W, DCP-375CW, DCP-6690CW, DCP-8065DN, DCP-9010CN, DCP-9040CN, DCP-9042CDN, DCP-J105, DCP-J140W, DCP-J315W, DCP-L3551CDW, DCP-L5600DN, DCP-T500W, DCP-T510W, DCP-T700W, DCP-T710W, MFC-1910W, MFC-295CN, MFC-440CN, MFC-465CN, MFC-490CW, MFC-5460CN, MFC-5490CN, MFC-5860CN, MFC-5890CN, MFC-640CW, MFC-6490CW, MFC-665CW, MFC-685CW, MFC-6890CDW, MFC-7840N, MFC-7860DW, MFC-790CW, MFC-795CW, MFC-8370DN, MFC-8380DN, MFC-8460N, MFC-8510DN, MFC-8860DN, MFC-8880DN, MFC-8910DW, MFC-9120CN, MFC-9140CDN, MFC-9320CW, MFC-9330CDW, MFC-9420CN, MFC-9440CN, MFC-9450CDN, MFC-9840CDW, MFC-9970CDW, MFC-J200, MFC-J2310, MFC-J2320, MFC-J2330DW, MFC-J2510, MFC-J2720, MFC-J2730DW, MFC-J3520, MFC-J3530DW, MFC-J3720, MFC-J3930DW, MFC-J415W, MFC-J430W, MFC-J5910DW, MFC-J615W, MFC-J625DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW, MFC-L2700DW, MFC-L2715DW, MFC-L2740DW, MFC-L2750DW, MFC-L2770DW, MFC-L3735CDN, MFC-L3750CDW, MFC-L3770CDW, MFC-L5900DW, MFC-L6900DW, MFC-L8690CDW, MFC-L8850CDW, MFC-L8900CDW, MFC-L9550CDW, MFC-T4500DW, MFC-T800W, MFC-T810W, MFC-T910DW

หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์

ส่วนแสดงความคิดเห็น

เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้
ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?
ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?

โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น