FAQs & Troubleshooting

Close

MFC-J220

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 10/12/2019 ID: faq00100687_000

"ControlCenter needs to be updated." - macOS 10.15 Catalina

ControlCenter needs to be updated.

 

Apple has announced a transition from 32-bit technology to 64-bit technology for macOS. You may receive this message about the Brother ControlCenter, which is a 32-bit application.

 

For macOS 10.15 Users

 

ControlCenter2 is not supported. You may use one of the following as an alternative scanning method:

> Click here for details about macOS 10.15 compatibility.

This specification will not affect your ability to print. You will still be able to print as normal for machines that support printing.

 

Related Models

ADS-1100W, ADS-1600W, ADS-2100, ADS-2400N, ADS-2600W, ADS-2800W, ADS-3600W, DCP-145C, DCP-1510, DCP-1610W, DCP-165C, DCP-195C, DCP-375CW, DCP-385C, DCP-6690CW, DCP-7030, DCP-7040, DCP-7055, DCP-7060D, DCP-8070D, DCP-9010CN, DCP-J100, DCP-J105, DCP-J125, DCP-J140W, DCP-J315W, DCP-L5600DN, DCP-T300, DCP-T500W, DCP-T700W, FAX-2950, MFC-1810, MFC-1815, MFC-1910W, MFC-250C, MFC-290C, MFC-295CN, MFC-490CW, MFC-5490CN, MFC-5890CN, MFC-6490CW, MFC-6890CDW, MFC-7340, MFC-7360, MFC-7450, MFC-7470D, MFC-7840N, MFC-7860DW, MFC-790CW, MFC-795CW, MFC-8370DN, MFC-8380DN, MFC-8510DN, MFC-8880DN, MFC-8910DW, MFC-9120CN, MFC-9140CDN, MFC-9320CW, MFC-9330CDW, MFC-9970CDW, MFC-J200, MFC-J220, MFC-J2310, MFC-J2320, MFC-J2330DW, MFC-J2510, MFC-J2720, MFC-J2730DW, MFC-J3520, MFC-J3530DW, MFC-J3720, MFC-J3930DW, MFC-J415W, MFC-J430W, MFC-J5910DW, MFC-J615W, MFC-J625DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW, MFC-L2700D, MFC-L2700DW, MFC-L2740DW, MFC-L5900DW, MFC-L6900DW, MFC-L8690CDW, MFC-L8850CDW, MFC-L8900CDW, MFC-L9550CDW, MFC-T4500DW, MFC-T800W

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.