FAQs & Troubleshooting

Close

HL-6050DN

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-6050DN

Not your product?

Date: 17/06/2014 ID: faq00000095_002

How do I install the Optional Tray Unit? - For Europe and Asia/Oceania

  1. Turn off the printer power switch, and remove all the cables from the machine.


     
  2. Lift the machine from the front by carefully gripping the recessed handles on the side of the machine and place it onto the lower tray unit, making sure that the alignment prints of the lower tray unit are inserted into the guide holes on the bottom of the machine.


     
  3. Remove the paper tray from the lower tray option, and swap it with the tray already fitted in your machine. Reconnect all cables and switch on the printer.


     
  4. Go to Start > Settings > Printers. Right click on your printer and choose Properties. Choose the Accessories tab and click Autodetect, once the lower tray has been detected then click Apply. (Under certain conditions the Autodetect function may be unavailable.)

Related Models

HL-6050D, HL-6050DN

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.