QL-800
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
QL-800
วันที่:18/10/2023 หมายเลขรหัส:faqp00100343_001
I cannot select my printer in P-touch Editor. (For macOS 10.13 or later)
When the printer is connected to your computer correctly, you can select your printer in P-touch Editor even if the printer driver is not installed.
If P-touch Editor fails to search for your printer, check the following according to the connection method:
Available interfaces depend on your printer.
USB connection
- Make sure the printer is turned on.
- Make sure the printer is connected to your computer correctly with a USB cable.
Wired LAN connection
- Make sure the printer is turned on.
- Make sure the LAN cable is connected to the router correctly.
- Make sure the printer and your computer are connected to the same network.
Wireless network connection (Wi-Fi®)
- Make sure the printer is turned on.
- Make sure the printer's Wi-Fi setting is on.
- Make sure the printer and your computer are connected to the same access point/router.
- Make sure the access point/router is on.
Bluetooth® connection
- Make sure the printer is turned on.
- Make sure the printer's and your computer's Bluetooth settings are on.
- Make sure your printer is detected from System Settings or System Preferences -> Bluetooth on your Mac.
PT-9700PC, PT-9800PCN, PT-D450, PT-D460BT, PT-D600, PT-D610BT, PT-E550W, PT-P710BT, PT-P750W, PT-P900W, PT-P950NW, QL-570, QL-700, QL-720NW, QL-800, QL-820NWB
หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์
ส่วนแสดงความคิดเห็น
เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้
ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?
ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?
โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น