TD-4100N
![]() |
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
![](/g/b/img/product/lptd4100neas.jpg)
TD-4100N
วันที่:25/11/2019 หมายเลขรหัส:faqp00001505_001
When I print many continuous labels, part of the label data is printed twice.
Part of the label data can be printed twice if the printer has not received data for a long period of time (e.g. a roll runs out during printing, but the printer remains powered-on for a long time before the roll is replaced with a new one.)
To avoid this, follow the steps below:
- Open the printer properties dialog box.
-
Open the [Ports] tab and click the [Configure Port...] button.
-
If the "LPR Byte Counting Enabled" check box is checked, uncheck it, and then click the [OK] button.
If you reach the end of the roll and there is unprinted label data, the last label printed on the replaced roll will be printed again onto the newly inserted one.
PT-9800PCN, QL-580N, QL-720NW, QL-800, QL-820NWB, TD-2130N, TD-2135N, TD-2135NWB, TD-4100N, TD-4410D, TD-4420DN, TD-4520DN, TD-4550DNWB
หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์
ส่วนแสดงความคิดเห็น
เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้
ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?
ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?
โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น