PT-D200
![]() |
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
![](/g/b/img/product/d200eas.jpg)
PT-D200
วันที่:06/11/2019 หมายเลขรหัส:faqp00001475_002
How do I set tape margins and what features are they?
-
Press the [Menu] key.
-
Press the Cursor key (
) to select [Margin] and press the [Enter] key (
/
).
-
Press the Cursor key to select the margin you want among [Full / Half / Narrow / Chain Print].
-
Press the [Enter] key.
<Full / Half / Narrow>
For leaving equal margins on both sides of the text
The margin length is as follows.
<Chain Print>
For creating a label containing text in various styles
-
Enter text.
-
Press the [Print] key (
/
), then [Copies:] appears.
-
Press the Cursor key or the number key to select the number of copies.
-
Press the [OK] key. Printing starts and then the message [OK to Feed?] appears.
-
Press the Escape key (
) to enter more text.
-
Clear the text, enter the text for the next label, and then press the [Print] key.
-
When the message [OK to Feed?] appears after the last label is printed, press the [OK] key.
- After the tape is fed, press the cutter lever to cut off the chain of labels.
-
When [Chain Print] is set, feed the tape before using the cutter otherwise a part of the text may be cut off. Also, cut along the printed dots (:) with scissors so the text is centered in the label.
- When [Half] or [Narrow] is set, the length from the printed dots (:) to the end of the label is displayed.
PT-D200, PT-D200DR, PT-D200KN, PT-D200KT, PT-D200RK, PT-E200
หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์
ส่วนแสดงความคิดเห็น
เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้
ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?
ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?
โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น