Innov-is 980K
![]() |
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
![](/g/b/img/product/hf_inov980keas.jpg)
Innov-is 980K
วันที่:07/04/2009 หมายเลขรหัส:faqh00000091_001
How do I remove the presser foot holder?
- Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
With models equipped with(needle position button), raise the needle by pressing
(needle position button) once or twice.
or
Mark
Needle position button
- Turn off the sewing machine.
Before replacing the presser foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if a button is accidentally pressed and the machine starts sewing.
- Raise the presser foot lever. The presser foot is raised.
Presser foot lever
- Press the black button at the back of the presser foot holder.
The presser foot holder releases the presser foot.
Black button
Presser foot holder
- Use the screwdriver to loosen the presser foot holder screw.
The presser foot is removed from the presser bar.
Screwdriver
Presser foot holder
Presser foot holder screw
Presser bar
BM-3500/2600, Innov-is 950, Innov-is 980D, Innov-is 980K, LS-2125/2160, NX-400Q/400, NX-600
หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์
ส่วนแสดงความคิดเห็น
เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้
ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?
ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?
โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น