HL-L2460DN
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
HL-L2460DN
วันที่:06/06/2023 หมายเลขรหัส:faq00100729_001
I cannot print or scan via USB on Fedora 38 or later and on their derivatives (Linux)
To be able to print or scan, do one of the following:
If you have one Brother machine
- Make sure that the machine is turned on.
- If you have already installed the Brother printer driver or scanner driver, uninstall them.
- Connect the machine to your computer using a USB cable.
- > Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
-
Disconnect the USB cable from your machine, wait a few seconds, and then reconnect the USB cable.
-
Install the Brother printer driver or scanner driver again.
If you have multiple Brother machines
- Make sure that the machines are turned on.
- If you have already installed the Brother printer drivers and scanner drivers, uninstall them.
- Connect the machines to your computer using USB cables.
- > Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
- Disconnect the USB cables from the machines, wait a few seconds, and then reconnect the USB cables.
- Install the Brother printer drivers and scanner drivers again.
หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์
ส่วนแสดงความคิดเห็น
เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้
ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?
ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?
โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น