FAQs & Troubleshooting

Close

MFC-L8900CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-L8900CDW

Not your product?

Date: 06/12/2018 ID: faq00100218_002

Configure Secure Function Lock 3.0 Using Web Based Management

  1. Start your web browser.
  2. Type "http://machine's IP address" or "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:
    http://192.168.1.2 or https://192.168.1.2
  3. If the machine prompts you for a password, type it, and then click Right Arrow.
  4. Click the Administrator tab.
  5. Click the Restriction Management or User Restriction Function menu in the left navigation bar.
  6. Select Secure Function Lock.
  7. Click Submit.
  8. Click the Restricted Functions menu in the left navigation bar.
  9. In the User List / Restricted Functions field, type a group name or user name.
  10. In the Print and the other columns, select a check box to allow or clear a check box to restrict the function listed.
  11. To configure the maximum page count, select the On check box in the Page Limits column, and then type the maximum number in the Max. Pages field.
  12. Click Submit.
  13. Click the User List menu in the left navigation bar.
  14. In the User List field, type the user name.
  15. In the PIN Number field, type a four-digit password.
  16. In the E-mail Address field, type the user's email address (Available only for certain models).
  17. To register the user's Card ID, type the card number in the Card ID (NFC ID) field (Available only for certain models) .
  18. Select User List / Restricted Functions from the drop-down list for each user.
  19. Click Submit.

Related FAQs

Related Models

MFC-L8690CDW, MFC-L8900CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.