HL-7050N
![]() |
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
![](/g/b/img/product/hl7050n_all.jpg)
HL-7050N
วันที่:16/10/2006 หมายเลขรหัส:faq00000292_014
What kind of memory can I use?
The HL-7050 and HL-7050N printer have 32 MB of standard memory (this may vary by country) and two slots for optional memory expansion (both slots will not be available if the printer is supplied with more than 32Mbytes of memory).
You can expand the memory up to 288 MB by installing dual in-line memory modules (DIMMs).
The following DIMM size can be installed:
<US>
Size |
Manufacture |
No. |
16 MB | TECHWORKS | 12456-0001 |
32 MB | TECHWORKS | 12457-0001 |
64 MB | TECHWORKS | 12458-0001 |
128 MB | TECHWORKS | 12459-0001 |
For more information, visit Techworks web site at http://www.techworks.com/
<Europe>
Size |
Manufacture |
No. |
16 MB | Buffalo Technology | 12323-0001 |
32 MB | Buffalo Technology | 12324-0001 |
64 MB | Buffalo Technology | 12325-0001 |
128 MB | Buffalo Technology | 12326-0001 |
In general, the DIMM that can be used with the HL-7050 and HL-7050N must have the following specifications:
Type: | 100 pin and 32 bit output |
CAS Latency: | 2 or 3 |
Clock frequency: | 66 MHz or more |
Capacity: | 16, 32, 64 MB or 128 MB |
Height: | 46 mm (1.8 inches) or less |
Parity: | None |
DRAM Type: |
SDRAM 4 Bank |
คำถามที่พบบ่อยที่เกี่ยวข้อง
หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์
ส่วนแสดงความคิดเห็น
เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้
ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?
ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?
โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น