FAQs & Troubleshooting

Close

HL-L8360CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-L8360CDW

Not your product?

Date: 07/09/2019 ID: faq00000308_504

Paper is Jammed Inside the Machine

If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these steps:

  1. Press the front cover release button and pull open the front cover.
  2. Hold the drum unit's green handle. Pull the drum unit out of the machine until it stops.
  3. Turn the green lock lever (1) counterclockwise until it locks in the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine.
    IMPORTANT

    Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit.

  4. Pull out the jammed paper slowly.
    IMPORTANT
    To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.
  5. Make sure the green lock lever (1) is in the release position, as shown in the illustration.
  6. Gently slide the drum unit into the machine until it stops at the green lock lever.
  7. Turn the green lock lever clockwise to the lock position.
  8. Using the green handle, push the drum unit back into the machine until it locks in place.
  9. Close the machine's front cover.

Related FAQs

Related Models

HL-L8260CDN, HL-L8360CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.