MFC-7820N
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc7820n_all.jpg)
MFC-7820N
Date: 11/17/2008 ID: faq00000694_001
"Document Jam" error appears on the LCD. What should I do?
If the document is jammed, follow the steps below.
If the Document is jammed in the top of the ADF unit...
-
Take out any paper from the ADF that is not jammed.
-
Open the ADF cover.
-
Pull the jammed document out to the left.
-
Close the ADF cover.
-
Press Stop/Exit.
If the Document is jammed under the document cover...
-
Take out any paper from the ADF that is not jammed.
-
Lift the document cover.
-
Pull the jammed document out to the right.
-
Close the document cover.
-
Press Stop/Exit.
If the Document is jammed at the output tray...
-
Pull the jammed document out to the right.
-
Press Stop/Exit.
MFC-7420, MFC-7820N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.