DCP-9045CDN
Vanliga frågor & felsökning |
DCP-9045CDN
Datum: 2008-09-23 ID: faq00000080_013
What is the recommended paper?
To get the best print quality, we suggest using the following paper.
Recommended paper:
Paper Type | Europe | USA |
Plain paper |
Xerox Premier 80 g/m2 |
Xerox 4200DP 20 lb |
Recycled paper | Xerox Recycled Supreme | (Xerox Recycled Supreme) |
Labels | Avery laser label L7163 | Avery laser labels white #5160 (Avery laser label L7163) |
Envelope | Antalis River series (DL) | Columbian #138 (COM10) |
*Printing on photo paper is not supported by Brother Color Laser models.
- Before you buy a lot of paper, test a small quantity to make sure that the paper is suitable.
- Use paper made for plain paper copying.
- Use paper that is 20 to 24 lb (75 to 90 g/m2).
- Use long grain paper with a neutral Ph value, and a moisture content of approx 5%.
- Use labels which are designed for use in laser printers.
- Avoid touching the printed surface of the paper immediately after printing.
- DO NOT load envelopes, labels or thick paper (more than 28 lb or 105 g/m2) into the paper tray or optional lower tray. It may cause paper jams.
- Do not use inkjet paper, iron-on transfer paper or perforated paper, because it will cause a paper jam or damage your machine.
The following paper specifications are suitable for your machine.
Basis weight (lb (g/m2)) | 20-24 (75-90) |
Thickness (µm) | 80-110 |
Roughness (sec.) | Higher than 20 |
Stiffness (cm3/100) | 90-150 |
Grain direction | Long grain |
Volume resistivity (ohm) | 10e9-10e11 |
Surface resistivity (ohm-cm) | 10e9-10e12 |
Filler | CaCO3 (Neutral) |
Ash content (wt%) | Below 23 |
Brightness (%) | Higher than 80 |
Opacity (%) | Higher than 85 |
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.