PT-P900W/P900Wc
![]() |
Vanliga frågor & felsökning |
![](/g/b/img/product/p900weuk.jpg)
PT-P900W/P900Wc
Datum: 2019-12-03 ID: faqp00100008_001
The label does not cut well.
If the label does not cut well or tape is jammed in the cutter, tape adhesive may have built up on the cutter blades after repeated use. To correct this problem, the tape cutter must be cleaned.
Cleaning the tape cutter
Wipe the cutter blades using a dry cotton swab.
-
Frequent cleaning is recommended.
- Cutter blade
- Cotton swab
-
Metal section
Do not touch the cutter blade with your bare hands.
If the problem still occurs, download and install the latest version of the firmware from the [Downloads] section of this website.
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.