TJ-4520TN
Vanliga frågor & felsökning |
TJ-4520TN
Datum: 2020-09-28 ID: faqp00001455_007
How to clean the Platen Roller
Clean the Platen Roller as follows when replacing the label roll with a new one.
- Turn off the printer.
-
Open the Media Cover.
-
Push the Print Head Release Lever to open the Print Head.
-
Rotate the Platen Roller and wipe it thoroughly with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
-
Close the Print Head by pushing down on both sides and make sure it locks into place.
-
Close the Media Cover.
Calibrate the Gap/Black Mark Sensor every time you change the media.
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.