Innov-is XP1
 |
Vanliga frågor & felsökning |
Innov-is XP1
Datum: 2018-08-09 ID: faqh00101102_000
Cannot thread the needle.
-
Needle is not in the correct position.
Press the Needle Position button to raise the needle.
(1) Needle Position button
-
Needle is installed incorrectly.
Reinstall the needle correctly.
Refer to How do I change the needle ?
-
Needle is turned, bent or the point is dull.
Replace the needle.
Refer to How do I change the needle ?
-
Upper threading is incorrect.
Check the steps for threading the machine and rethread the machine.
Refer to How do I thread my machine ?
-
The needle threader hook is bent and does not pass through the eye of the needle.
Contact your authorized Brother dealer.
-
The needle threader lever cannot be moved or returned to its original position.
Contact your authorized Brother dealer.
-
A size 65/9 needle is being used.
The needle is incompatible with the needle threader. Manually pass the thread through the eye of the needle.
Refer to How do I thread my machine ?
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.