MFC-J6945DW
![]() |
Vanliga frågor & felsökning |
![](/g/b/img/product/mfcj6945dw_us_eu_as.jpg)
MFC-J6945DW
Datum: 2018-10-02 ID: faq00100359_508
Check the Print Quality
If faded or streaked colours and text appear or if text is missing on your printouts, the print head nozzles may be clogged. Print the Print Quality Check Sheet and look at the nozzle check pattern.
- Press
.
- Press [Start].The machine prints the Print Quality Check Sheet.
- Check the quality of the four colour blocks on the sheet.
- The touchscreen asks about the print quality. Do one of the following:
- If all lines are clear and visible, press [No], and then press
to finish the Print Quality check.
- If lines are missing (see Poor, as follows), press [Yes].
OK
Poor
- The touchscreen asks you to check the print quality of each colour. Press the number of the pattern (1–4) that most closely matches the printing result.
- Do one of the following:
If print head cleaning is needed, press [Start] to start the cleaning procedure.
- If print head cleaning is not needed, the Maintenance screen reappears on the touchscreen. Press
.
- After the cleaning procedure is finished, the touchscreen asks if you want to print the Print Quality Check Sheet again. Press [Yes], and then press [Start].The machine prints the Print Quality Check Sheet again. Check the quality of the four colour blocks on the sheet again.
If you clean the print head and the print has not improved, try installing a new Brother Original replacement ink cartridge for each problem colour. Try cleaning the print head again. If the print has not improved, contact Brother customer service or your local Brother dealer.
- IMPORTANT
- DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.
![](/g/b/img/faqend/faq00100359_508/eu_ot/en/2112272/topic1_icon5.png)
When a print head nozzle is clogged, the printed sample looks like this.
![](/g/b/img/faqend/faq00100359_508/eu_ot/en/2112273/GUID-264D18A2-2278-4E7E-8C53-230FFBA34B8C-low.gif)
After the print head nozzle is cleaned, the lines are gone.
![](/g/b/img/faqend/faq00100359_508/eu_ot/en/2112274/GUID-1FC4A64D-6E6C-413D-9AC1-EC743D563369-low.gif)
MFC-J6945DW, MFC-J6947DW
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.