DCP-J1100DW
 |
Vanliga frågor & felsökning |
DCP-J1100DW
Datum: 2019-03-22 ID: faq00100284_510
Configure Email Sending Using Web Based Management
We recommend using Web Based Management to configure secured email sending with user authentication.
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
https://192.168.1.2
- If the machine prompts you for a password, type it, and then click
. - Click the Network tab.
- Click the Protocol menu in the left navigation bar.
- In the SMTP field, click Advanced Setting and make sure the status of SMTP is Enabled.
- Configure the SMTP settings.
- Confirm that the email settings are correct after configuration by sending a test email.
- If you do not know the SMTP server settings, contact your network administrator or Internet Service Provider (ISP).
- When finished, click Submit.The Test Send E-mail Configuration dialog box appears.
- Follow the instructions in the dialog box to test the current settings.
Relaterade Vanliga frågor
DCP-J1100DW, MFC-J1300DW
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.