DCP-J1100DW
 |
Vanliga frågor & felsökning |
DCP-J1100DW
Datum: 2019-03-22 ID: faq00100235_515
Send an Email Securely Using SSL/TLS
Your Brother machine supports SSL/TLS communication methods. To use email server that is using SSL/TLS communication, you must configure following settings.
Verify Server Certificate
Under SSL/TLS, if you choose SSL or TLS, the Verify Server Certificate check box will be selected automatically.
- Before you verify the server certificate, you must import the CA certificate issued by the CA that signed the server certificate. Contact your network administrator or your Internet Service Provider (ISP) to confirm if importing a CA certificate is necessary.
- If you do not need to verify the server certificate, clear the Verify Server Certificate check box.
Port Number
If you select SSL, or TLS, the Port value will be changed to match the protocol. To change the port number manually, type the port number after you select SSL/TLS settings.
You must configure your machine's communication method to match the method used by your email server. For details about your email server settings, contact your network administrator or your ISP.
In most cases, the secured webmail services require the following settings:
| SMTP | Port | 25 |
| Server Authentication Method | SMTP-AUTH |
| SSL/TLS | TLS |
Relaterade Vanliga frågor
DCP-J1100DW, MFC-J1300DW
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Observera att detta formulär endast används för feedback.