DCP-J1100DW
Vanliga frågor & felsökning |
DCP-J1100DW
Datum: 2019-03-22 ID: faq00100223_512
Import the Self-signed Certificate
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).For example:
https://192.168.1.2
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
- For example:
https://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
https://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
- For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
- If the machine prompts you for a password, type it, and then click .
- Click the Network tab.
- Click the Security tab.
- Click the Certificate menu in the left navigation bar.
- Click Import Certificate and Private Key.
- Browse to the file you want to import.
- Type the password if the file is encrypted, and then click Submit.
The self-signed certificate is imported to your machine.
To use SSL/TLS communication, the self-signed certificate must also be installed on your computer. Contact your network administrator.
Relaterade Vanliga frågor
DCP-J1100DW, MFC-J1300DW
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.