MFC-J4335DW(XL)
 |
Vanliga frågor & felsökning |
MFC-J4335DW(XL)
Datum: 2023-03-27 ID: faq00003042_002
Unable to scan from the Automatic Document Feeder (ADF), but the machine will scan from the flatbed (Windows)
This issue is typically caused when the Auto Crop feature is enabled within the scan settings. This feature can only be used from the Flatbed, so the machine's scan function will bypass the ADF by default. To disable Auto Crop, complete the following steps:
NOTE: Illustrations shown below are from a representative product and operating system, and may differ from your Brother machine and operating system.
-
Open PaperPort™.
(Windows 10/ Windows 11)
Click
(Start button) > (All Programs or All apps >) Nuance PaperPort > PaperPort.
(Windows 8.1)
Click
(PaperPort).
-
Click the Scan Settings button.
-
Make sure that Display scanner dialog box is checked.
- Click the Scan button.
-
Uncheck the Auto Crop setting.
- Load the document in the ADF and click Start. The document should scan from the ADF.
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.